Tapered Locking Bushing Examples

These examples show useful ways to describe a request. They do not guarantee that a particular replacement will be returned or approved for an application.

Manufacturer and part number

I need an alternative to a Fenner 029A0018 Taper-Lock bushing. It is size 1008 with an 18 mm keyed bore; a shallow key is not required.

The manufacturer and complete part number can be used to identify a reference. The supplied family, size, bore and key requirement remain relevant and should be checked if the reference details disagree.

Technical discovery

I need a Taper-Lock size 1008 bushing with an 18 mm finished keyed bore. I do not know the manufacturer or part number.

This describes the required interface without asserting a manufacturer reference. Add the retained hub’s bushing callout, installation details or other requirements if known.

Retained component information

My retained hub is marked for a Taper-Lock 1008 bushing. The shaft is 18 mm and uses a key. Find a suitable bushing.

The hub marking describes the bushing interface and the shaft describes the shaft-side requirement. Confirm any additional keyway, hardware or installation details the result identifies before selection.